Transceiver RFI Kits

 

983046578 - Transceiver RFI Kits
+3

HF Linear Amplifier RFI Kit - Icom 2KL, 4KL - 5 Filters for RF In/Out, AC power, Relay/PTT, Transceiver Control

RFI-LA-ICOM
$59.95
In stock
1
Product Details
MPN: RFI-LA-IC
Filter Power Rating (PEP watts): max coax cable rating
RFI Suppression Range (MHz): 1-100 MHz

Icom IC2KL, 4KL Standard RFI Kit

Included are the following chokes and installation guidelines:

RF Input: F240 toroid – 5-9 turns of RG-58 size through center

RF Output: FSB-1 (Big Clamp on) – 3 turns of RG-8 size cable

Relay Cable: FSB-1/2 – multiple turns through choke – ½” diameter hole

Transceiver Control Cable: FSB-1/2 – multiple turns through choke – ½” diameter hole

AC Power Line: FSB-1 (Big Clamp on) – 3 turns through center

Note to PW1 owners - use the DELUXE kit that has filters for all the I/O lines, 4 antenna outputs, and multiple input lines. See part # RFI-LA-PW1

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.