Transceiver RFI Kits

 

977476626 - Transceiver RFI Kits
+3

FT240-75, ID=1.4", AC/DC/Coax Noise Filter, RFI Range .15-10 MHz, 10 Pack

F240-75-10
$99.95
In stock
1
Product Details
MPN: F240-75
Country/Region of Manufacture: China
RFI Range (MHz): 150 KHz-10 Mhz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): .5/12.7
Weight (oz/gm): 106 grams
Initial permeability: 5000
Case/Box lot size: 100
: 10
: 9.995

Excellent very low frequency RFI suppression and common mode chokes < 10 MHz. Higher choking than Mix 31 under 10 MHz. Use for AC/DC power cables used with switching power supplies, data, audio, video cables for AM broadcast RFI suppression.

Bulk pack of 10 rings.

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.