FSB75-3/8, ID=3/8", RFI Range 150Khz-10 MHz
Product Details
Initial Permeability (@ 10KHz): 5000
Material: MnZn
Max cable size - in/mm: .388/9.85
OD (A) - in/mm: .906/23
ID (B) - in/mm: .4/10.15
Length (C) - in/mm: 1.55/39.4
Z (ohms per bead - single turn 200 KHz): 18
Z (ohms per bead - single turn 500 KHz): 46
Z (ohms per bead - single turn 1 MHz): 92
Z (ohms per bead - single turn 2 MHz): 115
Z (ohms per bead - single turn 5 MHz): 74
Ferrite Snap On, ID = .40 in/10.15mm, Mix 75
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.