Transceiver RFI Kits

 

FSB61-3/4, ID=3/4", RFI Range 200-2000 MHz

SKU FSB61-3/4-1
$14.95
Bulk pricing available for quantities of 10 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
10 items$13.4910% off
100 items$11.9520% off
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
FSB61-3/4, ID=3/4", RFI Range 200-2000 MHz
Product Details
Initial Permeability (@ 10KHz): 125
Material: NiZn
Max cable size - in/mm: .709/18
OD (A) - in/mm: 1.52/38.6
ID (B) - in/mm: .722/18.35
Length (C) - in/mm: 1.87/47.5
Z (ohms per bead - single turn 100 MHz): 360
Z ohms (per bead - single turn 250 MHz): 480
Z (ohms per bead - single turn 500 MHz): 350
Z (ohms per bead - single turn 1000 MHz): 110

Ferrite Snap On, ID = .74 in/18.8 mm, Mix 61

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.