FSB61-1/2, ID=1/2", RFI Range 200-2000 MHz, Bulk Pack of 10
Product Details
Initial Permeability (@ 10KHz): 125
Material: NiZn
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.14/29
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.14/29
Z (ohms per bead - single turn 100 MHz): 205
Z ohms (per bead - single turn 250 MHz): 320
Z (ohms per bead - single turn 500 MHz): 435
Z (ohms per bead - single turn 1000 MHz): 457
Ferrite Snap On, ID = .514in/13.1 mm, Mix 61, Bulk pack of 10, RFI range: 200-2000 MHz
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.