FSB31-1/2, ID=1/2", RFI Range 1-300 MHz - Bulk 10 Pack
Product Details
MPN: FSB31-1/2-10
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.22/31
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.55/5
Z (ohms per bead - single turn 1 MHz): 25
Z (ohms per bead - single turn 5 MHz): 71
Z (ohms per bead - single turn 10 MHz): 100
Z (ohms per bead - single turn 25 MHz): 156
Z (ohms per bead - single turn 100 MHz): 260
Z ohms (per bead - single turn 250 MHz): 260
RFI range from 1-300 MHz
Ferrite Snap On, ID = .514in/13.1 mm, Mix 31
# Turns of RG-8X = 2
# Turns of RG-213 = 1
Square or Hex sided depending upon inventory stock
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.