Transceiver RFI Kits

 

442283873 - Transceiver RFI Kits
+3

FB37-43 - ID 0.193" Dia (4.90mm) OD 0.375" Dia (9.53mm) Length 0.410" (10.41mm), RFI Range 20-250 MHz

FB37-43-1
$0.40
In stock
1
Product Details
MPN: FB63-43
Initial Permeability (@ 10KHz): 5000
Material: MnZn
Max cable size - in/mm: .193/4.75
OD (A) - in/mm: .375/9.5
ID (B) - in/mm: .193/4.75
Length (C) - in/mm: .41/10.4
Z (ohms per bead - single turn 1 MHz): 5
Z (ohms per bead - single turn 5 MHz): 20
Z (ohms per bead - single turn 10 MHz): 34
Z (ohms per bead - single turn 25 MHz): 53
Z (ohms per bead - single turn 100 MHz): 80
Z ohms (per bead - single turn 250 MHz): 92

Ferrite Slip On Bead, ID = .193in/4.75mm, Mix 43 - excellent tor individual wire common mode choke, 1 piece

FB37-43 - Solid Free Hanging Ferrite Core 80Ohm @ 100MHz., ID 0.193" Dia (4.90mm) OD 0.375" Dia (9.53mm) Length 0.410" (10.41mm)

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.