Transceiver RFI Kits

 

442283812 - Transceiver RFI Kits
+3

FB102-61 - 1/2" ID, RFI Range 200-2000 MHz

FB102-61-1
$5.95
In stock
1
Product Details
Initial Permeability (@ 10KHz): 125
Material: NiZn
Max cable size - in/mm: .5/12.6
OD (A) - in/mm: 1.02/25.9
ID (B) - in/mm: .505/12.8
Length (C) - in/mm: 1.125/28.6
Z (ohms per bead - single turn 100 MHz): 190
Z ohms (per bead - single turn 250 MHz): 300
Z (ohms per bead - single turn 500 MHz): 380
Z (ohms per bead - single turn 1000 MHz): 400

Ferrite Slip On Bead, ID = .505in/12.8mm, Mix 61, 1 piece

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.