FB102-43 - 1/2" ID/12.8mm, RFI Range 25-300 MHz
Product Details
MPN: FB102-43
Initial Permeability (@ 10KHz): 850
Material: NiZn
Max cable size - in/mm: .5/12.6
OD (A) - in/mm: 1.02/25.9
ID (B) - in/mm: .505/12.8
Length (C) - in/mm: 1.125/28.6
Z (ohms per bead - single turn 1 MHz): 15
Z (ohms per bead - single turn 5 MHz): 60
Z (ohms per bead - single turn 10 MHz): 91
Z (ohms per bead - single turn 25 MHz): 145
Z (ohms per bead - single turn 100 MHz): 235
Z ohms (per bead - single turn 250 MHz): 275
Case/Box lot size: 212
Ferrite Slip On Bead, ID = .505in/12.8mm, Mix 43, 1 piece, 212 per case - make excellent bead baluns/chokes with shrink wrap exterior for 1/2" cable
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.