Transceiver RFI Kits

 

2654217920 - Transceiver RFI Kits
+3

AC Cable Noise Filter for Standard 120VAC Plugs - 1.4" ID

ACCF-1.4
$12.95
In stock
1
Product Details
MPN: ACCF-3
Type: New
Country/Region of Manufacture: United States
RFI Range (MHz): 150 KHz to 10 MHz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): 5/12.7
Weight (oz/gm): 106 grams
Initial permeability: 5000

(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75

Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores for higher choking. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.

Note: Wire shown for application purpose, NOT included with purchase.

If you want the AC chord preassembled on the ferrite filter, see part# AC-CHOKE-6

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.