Ferrite Flat Cable RFI/Noise Filter, 1.35" wide slot RFI Range 10-500 MHz, 1 Piece
FSB43-1.35-1
$5.95
In stock
1
Product Details
Initial Permeability (@ 10KHz):
850
Max cable size - in/mm:
1.4" wide,
| Dim | mm | mm tol | nominal inch | inch misc. |
| A | 49.5 | +/- 2.5 | 1.948 | _ |
| B | 33.70 | _ | 1.327 | _ |
| C | 32.3 | +/- 1.6 | 1.272 | _ |
| D | 7.70 | +/- 0.5 | 0.303 | _ |
| Cable Information | |||
| Max Diameter | Max Dimension | Solid Equivalent | Flat Cable Cores |
| 0 0 |
33.70mm x 1.30mm | _ | - |
Excellent for reducing RFI/Noise into/from flat data,/video cables up to 34mm wide and 1 mm thick. Very useful suppression up to 500 MHz using mix 43 material.
Save this product for later
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices. Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations. If you have both HF and VHF installations in your vehicles, you may need both kits.
To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations. Each kit uses the appropriate ferrite mix for the frequency range desired.