Mobile Station RFI Kits

FSB31-3/4, ID=3/4", RFI Range 1-300 MHz, Bulk Pack of 10

FSB31-3/4-10
$59.95
In stock
1
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: .728/18.5
OD (A) - in/mm: 1.15/29.2
ID (B) - in/mm: .74/18.8
Length (C) - in/mm: 1.65/41.9
Z (ohms per bead - single turn 1 MHz): 16
Z (ohms per bead - single turn 5 MHz): 48
Z (ohms per bead - single turn 10 MHz): 89
Z (ohms per bead - single turn 25 MHz): 125
Z (ohms per bead - single turn 100 MHz): 220
Z ohms (per bead - single turn 250 MHz): 310

Ferrite Snap On, ID = .74 in/18.8 mm, Mix 31, Bulk pack of 10

Save this product for later
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.