Mobile Station RFI Kits

3567247745 - Mobile Station RFI Kits
+2

FLEX PGXL Linear Amplifier RFI Kit - Single/Dual I/O Options

Store/RFI Solution Kits/Radio Communication RFI Solutions/Linear Amplifier RFI Kits
SKU RFI-LA-FLEX-1
$59.95
Input/Ouput RF Ports
1
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
Pin it
FLEX PGXL Linear Amplifier RFI Kit - Single/Dual I/O Options
Store/RFI Solution Kits/Radio Communication RFI Solutions/Linear Amplifier RFI Kits
Product Details
MPN: RFI-LA-FLEX-1 or RFI-LA-FLEX-2
RFI Suppression Range (MHz): 1-100 MHz

PURPOSE

These kits are designed to choke common mode currents going into or exiting from your amplifier cables.Filters are supplied for the RF In, RF Out, Relay Cable/control lines, and AC power line.Use of the filters often helps cure SWR problems between amp exciter and amp and between amp and antenna tuner or direct to antenna.The AC power line choke helps keep common mode current out of the power line which could cause interference to other devices connected to the same power line if not suppressed.

USE

Standard kit for amplifiers with single input, single output, relay keying and AC input

Deluxe Kit for amplifiers with dual inputs/outputs, frequency/keying control lines

KIT INCLUDES

Filter Type

Usage

Standard Kit

Deluxe kit

F240 Ring (1.4” ID)

RF Exciter input

1

2

Snap On (1/2” ID)

Ethernet, PTT control

2

2

Snap On (1” ID)

RF Output

1

2

Snap On (1” ID)

120/240 VAC Input

1

1

Total Filters

5

7

INSTALLATION GUIDELINES

Standard Kit - Part# RFI-LA-FLEX-1

RF Input:Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center

RF Output:Snap On Filter (1” ID) – 3 turns of coax cable through center

PTT Relay Cable:Snap On Filter (1/2” ID) – multiple turns through center

Ethernet Cable:Snap On Filter (1/2” ID) – multiple turns through center

AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center

Deluxe Kit - Part# RFI-LA-FLEX-2

RF Input (2)Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center

RF Output: (2)Snap On Filter (1” ID) – 3 turns of coax cable through center

PTT Relay Cable:Snap On Filter (1/2” ID) – multiple turns through center

Ethernet Cable:Snap On Filter (1/2” ID) – multiple turns through center

AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center

Also make sure you connect a good RF ground to the amplifier ground post.

Show More
You May Also Like
982808123 - Mobile Station RFI Kits
HF Transceiver RFI/Noise Reduction Kit, RFI Range 1-300 MHz, 5 Filters
HF Transceiver RFI/Noise Reduction Kit, RFI Range 1-300 MHz, 5 Filters
SKU RFI-XCVR-STD
$39.95
Display prices in:USD
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.