Solar RFI/Noise Filter - 3/4" ID

Name: Solar RFI/Noise Filter - 3/4" ID
SKU: SNF-3/4
Price: 19.5 USD
Availability: InStock

SNF-3/4

$19.50

In stock

Quantity:

Product Details

Material: MnZn

Max cable size - in/mm: .709/18

OD (A) - in/mm: 1.52/38.6

ID (B) - in/mm: .74/18.8

Length (C) - in/mm: 1.87/47.5

Z (ohms per bead - single turn 200 KHz): 30

Z (ohms per bead - single turn 500 KHz): 92

Z (ohms per bead - single turn 1 MHz): 130

Z (ohms per bead - single turn 2 MHz): 81

Z (ohms per bead - single turn 5 MHz): 66

Ferric snap on bead filter effective over frequency ranges specific to solar installations including PV solar arrays, inverters, optimizers, combiners and network related control devices.

Effectively suppresses Radio Frequency Interference under 300 MHz. Use for solar installations of AC, DC, data and Ethernet cables for reducing common mode currents creating interference in electronic devices.

THE RFI KIT FILTERS ONLY SUPPRESS COMMON MODE CURRENT (SIGNALS) THAT ARE COMMON TO ALL WIRES IN THE CABLE, AND DOES NOT EFFECT INDIVIDUAL DIFFERENTIAL SIGNALS ON EACH WIRE. THE FILTERS HAVE NO EFFECT ON THE NORMAL SIGNALS CARRIED WITHIN THE CABLE.

Save this product for later

These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.

Typical Installations


Ethernet Cable on F-240 Toroid – 7 turns	Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance	Ethernet Cable on FSB-1/4
AC Cable on F-240 Toroid – 6 turns	DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns