All coax I/O and control lines and AC/DC power line for SPE-1.3K-FA or SPE-1.5K-FA amplifiers with multiple RF inputs and outputs, control/keying/frequency I/O.
Included are the following chokes and installation guidelines to suppress RFI in and out:
RF Input (3x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center
RF Output (4x):Snap On Filter (1” ID) – 3 turns of coax cable through center
Relay Cable/ALC Cable (4x):Snap On Filter (1/2” ID) – multiple turns through center
CAT/USB (5x):Snap On Filter (1/2” ID)- multiple turns through filter for each ACC
AC Power:Snap On Filter (1” ID) – 3 turns of power cord through center
You get 1.4" ID Ring x 3, 1" ID snap on x 5, 1/2" ID snap on x 9 with each kit.
Typical Installations
 Ethernet Cable on F-240 Toroid – 7 turns |
 Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance |
 Ethernet Cable on FSB-1/4 |
 AC Cable on F-240 Toroid – 6 turns |
 DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns |