Ferrite Flat Cable RFI/Noise Filter, 1.35" wide slot RFI Range 10-500 MHz, 1 Piece
FSB43-1.35-1
$5.95
In stock
1
Product Details
Initial Permeability (@ 10KHz):
850
Max cable size - in/mm:
1.4" wide,
| Dim | mm | mm tol | nominal inch | inch misc. |
| A | 49.5 | +/- 2.5 | 1.948 | _ |
| B | 33.70 | _ | 1.327 | _ |
| C | 32.3 | +/- 1.6 | 1.272 | _ |
| D | 7.70 | +/- 0.5 | 0.303 | _ |
| Cable Information | |||
| Max Diameter | Max Dimension | Solid Equivalent | Flat Cable Cores |
| 0 0 |
33.70mm x 1.30mm | _ | - |
Excellent for reducing RFI/Noise into/from flat data,/video cables up to 34mm wide and 1 mm thick. Very useful suppression up to 500 MHz using mix 43 material.
Save this product for later
These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.
Typical Installations
 Ethernet Cable on F-240 Toroid – 7 turns |
 Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance |
 Ethernet Cable on FSB-1/4 |
 AC Cable on F-240 Toroid – 6 turns |
 DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns |