Computer RFI Kits

CUBE Feed Line Choke, 1:1, 5KW PEP, .2-5 MHz, AM Broadcast, 160 and 80 Meter Common Mode Noise Filter, 30 to 42dB Noise Suppression

SKU CU-1-5000LF
$129.95
Bulk pricing available for quantities of 2 units or more
Output Connector Selection
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$119.958% off
10 items$109.9515% off
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
CUBE Feed Line Choke, 1:1, 5KW PEP, .2-5 MHz, AM Broadcast, 160 and 80 Meter Common Mode Noise Filter, 30 to 42dB Noise Suppression
Product Details
Brand: Palomar Engineers
MPN: CU-1-5000LF
Effective Frequency Range (MHz): .2-5 MHz (see CMRR graph)
PEP Power Rating (watts): 5000
Common Mode Attenuation (db): 30-42 dB
Estimated Insertion Loss (db): .10 or less
Input Connector Type: SO-239 female
Output Connector Connector Type: 2 top studs, side eyebolts and halyard hoist or SO-239/N
Ground Connector (Y/N): none
Enclosure Size (LxWxH inches): 4 x 4 x 2

5000 Watt Rated 1:1 CUBE™ Choke - .2-5 MHz (effective to 100 KHz)

Th CU-1-5000LF unun is useful as common mode feed line chokes or coax to antenna interfaces. SO-239 output models can also be used with balanced antennas if a short coax cable “pigtail” is used on the output and connected to the antenna. Rated 5000 Watts PEP from .2-5 Mhz. Use as line isolator, antenna interface, or as a common mode choke to keep RF on the antenna and off the outside of the coax braid.

These high powered chokes are more effective then our sleeve feed line chokes due to multi-turn ferrite bead topology using high permeability ferrite cores which provides a higher choking impedance over a broad frequency range. Typical common mode rejection (CMRR) is 30-42 over the frequency range (see graph) For most effective results, use 1 choke at the antenna feed point to keep transmit RF off the coax braidand another at the radio end of the coax. Helps reduce noise floor too by choking off common mode neighborhood noise picked up on outside of coax braid.

Available in 1.5K and 5K PEP models. Picture shows 1.5KW model, but 5KW model is same size and frequency specs but 5KW PEP.


These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail. 

 

 

Typical Installations

 

20131210 115137 150x150 - Computer RFI Kits

Ethernet Cable on F-240 Toroid – 7 turns

20131210 114800 150x150 - Computer RFI Kits

Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance

20131210 1148191 150x150 - Computer RFI Kits

Ethernet Cable on FSB-1/4

20131210 114716 150x150 - Computer RFI Kits

AC Cable on F-240 Toroid – 6 turns

20131210 114844 150x150 - Computer RFI Kits

DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns