AC/DC Generator RFI Noise Filter Kit = 1" ID - 2 filters

Name: AC/DC Generator RFI Noise Filter Kit = 1" ID - 2 filters
SKU: RFI-GEN-1
Price: 39 USD
Availability: InStock

RFI-GEN-1

$39.00

In stock

Quantity:

Product Details

MPN: RFI-GEN-1

Type: New

Country/Region of Manufacture: United States

Filter Power Rating (PEP watts): power rating of cable

RFI Suppression Range (MHz): 1-300 MHz

The RFI generator kit includes 2 snap on filters with 1 inch inside diameter for 1-2 turns of AC generator cable at generator and another 1-2 turns through center at the end of the generator cable near the powered device. The filter near the generator isolates generator power cable and prevents it from acting as an RFI antenna (generator source) and the filter near the powered device prevents the powered device from using the generator cable as an RFI antenna.

Use 2 or more turns through the filter for higher RFI suppression than a single turn (2 turns is 4 times the suppression as 1 turn, 3 turns is 9 times a single turn, etc.)

If you have a generator cable larger than 1/2" diameter, consider the RFI-GEN-3 generator filter with a 3" inside diameter.

Note: generator cable not included.

Save this product for later

These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.

Typical Installations


Ethernet Cable on F-240 Toroid – 7 turns	Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance	Ethernet Cable on FSB-1/4
AC Cable on F-240 Toroid – 6 turns	DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns