Hybrid 6:1 Current Balun + 1:1 Current Balun in one enclosure, 1.8-61 MHz, 1.5KW/5KW PEP

Name: Off Center Fed (OCF) 4:1 Balun and Choke Combo, 1.8-61 MHz, 1.5/3/5KW PEP
Brand: Palomar Engineers
SKU: CB-6-1-1500
Price: 149.95 USD
Availability: InStock

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/Off Center Fed Dipole Transformers

SKU CB-6-1-1500

$149.95

On Sale

$189.95 Save 21%

Bulk pricing available for quantities of 2 units or more

Output Connectors

Side Eyebolts, Top Eyebolt/hoist

Top Studs

Power Rating

1500 Watts PeP

5000 WattsPEP (+$100.00)

Quantity:

Buy more, save more

Quantity	Price per item	Discount
2 items	$139.95	7% off
10 items	$133.95	11% off
100 items	$129.95	13% off

Save this product for later

Hybrid 6:1 Current Balun + 1:1 Current Balun in one enclosure, 1.8-61 MHz, 1.5KW/5KW PEP

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/Off Center Fed Dipole Transformers

Product Details

MPN: CB-6-1-1500EB or TS option, 1.5KW or 5KW option

Country/Region of Manufacture: USA

Input ohms/Output ohms: 50 in/100 out

Frequency Range < 2:1 SWR (MHz): 1.8-61 MHz

PEP Power Rating (watts): 1.5KW/5KW

Enclosure Size: 4"x4"x 2"(1.5KW), (6"x6"x4" 5KW)

Weight (pounds): 3 or 5 # for 5KW

Antenna Compatability: Off Center Fed

The CB-6-1-1500 is a CUBE(TM) enclosure containing a multi-core, broadband 6:1 impedance transformer (50 ohm coax input to 300 ohm balanced output) in series with a 1:1 current balun for extra common mode current choking to keep RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI). Rated for full 1500 watts PEP and 450 watts CW (ICAS). 1.8Mhz – 61 MHz.

CB-6-1-1500EB is housed in a 4” x 4” x 2” waterproof housing with SO-239 input and stainless steel eye bolts on the side for ease of connection to your wire antenna. Top eye bolt acts as an antenna hoist. Also available with top studs for post or wall mounting (Model # CB-6-1-1500TS). CB-6-5000EB or TS is housed in a 6" x 6" x 4" water proof enclosure.

Balun is often used for OCF antennas installed at higher distances over ground

When considering solutions for AM broadcast (550 Khz – 1.8 Mhz) you should consider Mix 77 ferrites available in a variety of shapes and sizes. Choose a size to give the maximum number of turns of the affected wire or cable.

AM broadcast transmits on a low frequency with large antennas. Consequently it takes a large antenna to receive the signals. Typical “antennas” are AC house wiring, phone lines, long satellite or cable TV cables, DSL/CAT5 lines running between rooms, etc. The device wires that connect to these “antennas” need to be choked with as many turns through the ferrite as possible. Some installation examples are shown below on this page.

For AC/ DC power cords and coax cables the F240-77 (2.4″ OD, 1.4″ ID) “Donut” toroid is the most popular. Also available are smaller toroid donuts and Mix 77 beads. Shown below is a graph with 8, 10, and 12 turns through the toroid – obviously more turns has higher choking impedance. Mix 77 toroid products are HERE and Mix 77 small beads (for small wires) are HERE

F240 77 Turns Comparison 1024x648 - AM Broadcast RFI Kits

F240-77 Turns Comparison from .1 – 8.1 Mhz

Shown below is a graph of frequency response verses choking magnitude for a F240-77 in the AM Broadcast band for a 12 turn coil around the toroid. (Same info as above but different frequency range).