For impedance transformation/isolation applications when max power is < 10 Watts PEP, this transformer provides a simple interface between transmission lines with different connectors or impedances or simply common mode isolation. DC continuity for bias-T applications.
The Ferrite Snap On Sampler Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 1″ for use as either single turn or multiple turn ferrite choke filters.
The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
Mix 31 Ferrite Snap On Sampler (RFI Suppression range is 1-300 MHz)
FSB31-1/4 – 1/4″ ID – 3 pieces
FSB31-1/2 – 1/2″ ID – 3 pieces
FSB31-3/4 – 3/4″ ID – 3 pieces
FSB31-1 - 1" ID - 1 piece
