5:1 Baluns/Ununs

5:1 CUBE™ Unun – Model CU-5-1500 (50:250 Ohm, 1.8-61 MHz, 1.5KW PEP)

Application. For traveling wave, end fed or portable 20-31 foot vertical antennas the 5:1 unun makes a good transformer for converting 50 ohm coax to a 250 ohm feed point. If you use the antenna on multiple bands, the feed point impedance may not always be 250 ohms and use of the unun at high (>350 ohms) or low (<100 ohms) will require reduced power input or the unun may have its power ratings exceeded and damage to the unun may occur. The (5:1 conversion ratio will change for loads other than 250 ohms unbalanced.

Typical application:

CU 5 1500 antenna - 5:1 Baluns/Ununs

Also available as a balanced output – CB-5-1500

Ferrite Snap On Sampler Pack, Mix 31, RFI Range 1-300 MHz - 10 filters (1/4, 1/2, 3/4, 1)

FSOSP-31-10
$59.95
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: FMSCP-31-10
Type: NEW
Country/Region of Manufacture: United States
: 10

The Ferrite Snap On Sampler Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 1″ for use as either single turn or multiple turn ferrite choke filters.

The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:

Mix 31 Ferrite Snap On Sampler (RFI Suppression range is 1-300 MHz)

FSB31-1/4 – 1/4″ ID – 3 pieces

FSB31-1/2 – 1/2″ ID – 3 pieces

FSB31-3/4 – 3/4″ ID – 3 pieces

FSB31-1 - 1" ID - 1 piece


Save this product for later