5:1 CUBE™ Unun – Model CU-5-1500 (50:250 Ohm, 1.8-61 MHz, 1.5KW PEP)
Application. For traveling wave, end fed or portable 20-31 foot vertical antennas the 5:1 unun makes a good transformer for converting 50 ohm coax to a 250 ohm feed point. If you use the antenna on multiple bands, the feed point impedance may not always be 250 ohms and use of the unun at high (>350 ohms) or low (<100 ohms) will require reduced power input or the unun may have its power ratings exceeded and damage to the unun may occur. The (5:1 conversion ratio will change for loads other than 250 ohms unbalanced.
Typical application:
Also available as a balanced output – CB-5-1500
FT400-3I, ID=3", RFI Range 1-300 MHzProduct DetailsMPN: F400-31RFI Range (MHz): 1-300 MHzID-B (in/mm): 3/76.2OD-A (in/mm): 4/101.6Height-C (in/mm): 1/25.4Weight (oz/gm): 420 gramsInitial permeability: 1500Case/Box lot size: 25Frequency (MHz)/Single turn impedance (ohms): 1MHZ:14 ohms, 5 MHz: 31 ohms, 10 MHz: 45 ohms, 25 MHz: 76 ohms(4″ OD, 3″ ID hole), available in mix 31 only
Excellent for large cables or multiple cables – use multiple cores for higher choking. Also useful when you need high turns count for high choking with large cable - works on AC or DC power lines and also coax cable lines.
(4″ OD, 3″ ID hole), available in mix 31 only
Excellent for large cables or multiple cables – use multiple cores for higher choking. Also useful when you need high turns count for high choking with large cable - works on AC or DC power lines and also coax cable lines.