5:1 Baluns/Ununs

5:1 CUBE™ Unun – Model CU-5-1500 (50:250 Ohm, 1.8-61 MHz, 1.5KW PEP)

Application. For traveling wave, end fed or portable 20-31 foot vertical antennas the 5:1 unun makes a good transformer for converting 50 ohm coax to a 250 ohm feed point. If you use the antenna on multiple bands, the feed point impedance may not always be 250 ohms and use of the unun at high (>350 ohms) or low (<100 ohms) will require reduced power input or the unun may have its power ratings exceeded and damage to the unun may occur. The (5:1 conversion ratio will change for loads other than 250 ohms unbalanced.

Typical application:

CU 5 1500 antenna - 5:1 Baluns/Ununs

Also available as a balanced output – CB-5-1500

FORK SOLDER LUG - 14-16AWG - 1/4 SPACING - 10 PIECES,

FSL25-10
$4.95
Ground Connector
In stock
1
Product Details
MPN: FSL25-100

Fork solder lug, 1/4" hole, wire size is 12-14 AWG - 10 pieces, takes solder easily - use for ground connections on electronic chassis or coax chassis connectors or antenna wire connections to baluns, thru-bolts, etc. Work great for antenna radial connections..

Save this product for later