G5RV/ZS6BKW Antennas

The ZS6BKW antenna is a better match for our bands than the G5RV. The method of construction and tuning  is essentially the same for both antennas but the dimensions are different.

Here is the ZS6BKW antenna installed at AK6R fine tuned for the CW/FT8 frequencies on 40-20-17-12-10 meters.  An excellent antenna when installed at 30 feet or higher and no tuner required avoiding the tuner losses and constant retuning.  If you want to work all bands from 80-10 install an antenna tuner between the 1:1 balun and the amplifier and ignore the 39/40 switch.

Is this the best FT8 antenna?  – I think so as I has made over 70,000 contacts and it still is a proven winner -Good world wide DX, easy to install, no tuner and takes full legal limit.

PAL ZS68006 Ant Layout - G5RV/ZS6BKW Antennas

 

Here are several different 1:1 baluns you can use depending on power requirements:

442283796 - G5RV/ZS6BKW Antennas
+4
+3
+2

FB102-43 - 1/2" ID/12.8mm, RFI Range 25-300 MHz

Store/Ferrite Core Products/Mix 43/Slip On - Mix 43 - RFI Range 20-300 MHz
SKU FB102-43-1
$3.30
Bulk pricing available for quantities of 10 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
10 items$3.009% off
100 items$2.6918% off
212 items$2.2532% off
Save this product for later
Share this product with your friends
Pin it
FB102-43 - 1/2" ID/12.8mm, RFI Range 25-300 MHz
Store/Ferrite Core Products/Mix 43/Slip On - Mix 43 - RFI Range 20-300 MHz
Product Details
MPN: FB102-43
Initial Permeability (@ 10KHz): 850
Material: NiZn
Max cable size - in/mm: .5/12.6
OD (A) - in/mm: 1.02/25.9
ID (B) - in/mm: .505/12.8
Length (C) - in/mm: 1.125/28.6
Z (ohms per bead - single turn 1 MHz): 15
Z (ohms per bead - single turn 5 MHz): 60
Z (ohms per bead - single turn 10 MHz): 91
Z (ohms per bead - single turn 25 MHz): 145
Z (ohms per bead - single turn 100 MHz): 235
Z ohms (per bead - single turn 250 MHz): 275
Case/Box lot size: 212

Ferrite Slip On Bead, ID = .505in/12.8mm, Mix 43, 1 piece, 212 per case - make excellent bead baluns/chokes with shrink wrap exterior for 1/2" cable

Show More
Display prices in:USD

 

Here is the Coax Noise Filter used to suppress coax common mode currents (works for all type of antennas)

 

PDF of ZS6BKW at AK6R Construction Article HERE: My ZS6BKW Antenna