The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes. The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
Simple Dipole Feed Line Choke for 1/4" coax (1.8-61 MHz)
The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point).
Improves antenna pattern by preventing your dipole from becoming a tripole
Prevents pesky coax braid radiation and RFI
for best results use multiple turns through center
Use one choke for each antenna feed line - take a 3 foot piece of G-8X (part# RG8X-3) and wrap 10-12 turns thru center for a good feed line choke.
