The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes. The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
FSB75-3/8, ID=3/8", RFI Range 150Khz-10 MHz, 10 Pack
Product Details
Initial Permeability (@ 10KHz): 5000
Material: MnZn
Max cable size - in/mm: .388/9.85
OD (A) - in/mm: .906/23
ID (B) - in/mm: .4/10.15
Length (C) - in/mm: 1.55/39.4
Z (ohms per bead - single turn 200 KHz): 18
Z (ohms per bead - single turn 500 KHz): 46
Z (ohms per bead - single turn 1 MHz): 92
Z (ohms per bead - single turn 2 MHz): 115
Z (ohms per bead - single turn 5 MHz): 74
Ferrite Snap On, ID = .40 in/10.15mm, Mix 75, 10 pack - very useful for low frequency 150 KHz - 10 MHz. Better than Mix 31 below 4 MHz.