Ferrite Snap On Combo Pack

Split Bead Picture 1 - Ferrite Snap On Combo Pack

The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes.   The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on  with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:

 

 

Bullet Antenna End Fed Antenna Counterpoise Kit (41/71/92/111/155 Ft. Antenna Lengths)

SKU BULLET-CPK-41-20
$14.95
Wire Antenna Length
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Bullet Antenna End Fed Antenna Counterpoise Kit (41/71/92/111/155 Ft. Antenna Lengths)
Product Details
Brand: Palomar Enginees
UPC: Does not apply
MPN: BULLET-CPK
Type: NEW
Country/Region of Manufacture: USA

The “Bullet” End Fed Antenna Counterpoise Kit

Bullet 9U Antenna Counterpoises 08282022 png - Ferrite Snap On Combo Pack

Th kit contains 1 pre-assembled counterpoise wire which easily attaches to the counterpoise connector on the BULLET matching unit. Improves performance on 1 or more bands. Black/Gray/Blue wire is standard.

Application Note: This kit is typically used with only with Bullet Antenna systems like the 41 foot, 71 foot, 92 foot, 111 foot or 155 foot when you DO NOT USE the coax braid as the counterpoise (such as when you coax is too short). The counterpoise radiates just like the other half of a dipole so DO NOT GROUND IT! It is used to fine tune particular bands (by varying the length to get the lowest SWR reading on as many bands as possible. Multiple length counterpoises can also be used if needed for a particular band) if your particular antenna geometry doesn't show a low enough SWR on a particular band.

Suggested counterpoise lengths are as follows:

41 foot antenna wire needs a 16 foot length (20 feet of wire supplied so you can adjust as needed by folding back on itself)

71 foot antenna wire needs a 42-50 foot length (50 feet of wire supplied so you can adjust as needed by folding back on itself)

92 foot antenna wire needs a 90 foot length (100 feet of wire supplied so you can adjust as needed by folding back on itself)

111 foot antenna wire needs a 37 foot length (50 feet of wire supplied so you can adjust as needed by folding back on itself)

155 foot antenna wire needs a 95 foot length (100 feet of wire supplied so you can adjust as needed by folding back on itself)