The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes. The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
We have put together a generic kit of 5 large 2.4″ ferrite rings for AC/DC line cords and 8 easy-to-use snap on beads (1/2″ hole) specifically chosen to be effective for the most common devices effected by AM Broadcast and VLF RFI in the range of 150 KHz to 10 Mhz.
Effective suppression for interference to alarm systems, audio equipment, phone and ethernet cables, computers and control systems, and commercial and consumer electronic devices.
Complete with instruction manual with installation pictures. If you can screw in a light bulb and follow instructions, you should have no problem installing the chokes on your effected equipment.
