The Ferrite Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple suppression mixes. Included in this combo pack are ten 2.4″ OD/1.4″ ID ring toroids as follows:
Mix 75 effective from .15-10 MHz including AM Broadcast band – quantity: 3
Mix 31 effective from 1-300 MHz for general purpose – quantity: 4
Mix 61 effective from 200-2000 MHz for cell phone, WIFI, HDTV, Cable TV interference – quantity: 3
SignalPen(TM)
Our device, in the style of a pen. A portable device that you hold at the end of the pen to detect any RF signal source in close proximity without a battery. It uses RF electromagnetic field as a power source to light up an indicating light. Simple tool/instrument to locate or troubleshoot any RF source from handheld transceiver, mobile radios, or base station and radio repeaters. This device also detects a high voltage AC power line from 15kV and above, also a handy tool for electrician. Just store in shirt pocket like your other pens!
Self-Powered RF Detection Light (No Battery Needed)
Product Dimensions: The size of a pen
Specifications: 60 Hz to 1.2 GHz
For Optional Models: 2.4 to 6 Ghz Min. to Max.
RF Powered Detection: Milliwatts to Kilowatts
Proximity Detection: Wireless: 0.5 in to 3 ft
Capable of in-circuit detection from 20 mW. 30 seconds at 100W
Warranty: 3 years warranty no matter what, except:Intentional breakage and tampering of device
USER MANUAL
The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below
 AC Cable on F-240 Toroid – 7 turns |
 DC Cable on F240 – 4 turns |
The ring toroids can also be used on coax or signal lines as shown below:
 RG58 12 turns on FT240 |
 Ethernet Cable on F-240 Toroid – 7 turns |
For RFI/EMI wrap as many turns as possible for higher choking (under 30 mHz).