Ferrite Ring Combo Pack

The Ferrite Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple  suppression mixes.  Included in this combo pack are ten 2.4″ OD/1.4″ ID ring toroids as follows:

Mix 75 effective from .15-10 MHz including AM Broadcast band – quantity: 3

Mix 31 effective from 1-300 MHz for general purpose – quantity: 4

Mix  61 effective from 200-2000 MHz for cell phone, WIFI, HDTV,  Cable TV interference – quantity: 3

RG-400 Coax Jumper Cable with PL-259's on each end - 3 feet, Double Shield, High Power

SKU RG-400-3
$19.95
New
Bulk pricing available for quantities of 2 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$17.9510% off
10 items$15.9520% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
RG-400 Coax Jumper Cable with PL-259's on each end - 3 feet, Double Shield, High Power
Product Details

This cable is 50 ohm and 3 feet long double shielded with foil and braid and PL-259 connectors on each end. All the connections inside are soldered and the cable is made of copper conductors with coax having PVC jacket. RG400 is generally useful up to 5000 watts PEP at HF frequencies below 30 MHz. Greater power capability and frequency range than RG-8X, yet similar physical size.

Use for short jumper for Palomar Engineers Noise Filters like CMNF-500-50 or use with Simple Dipole Feed line Choke (SDFLC) to make a 10 turn high wattage feed line choke. Also useful between radio devices such as transceiver and amplifier, antenna tuner, SWR meter, etc.


** Our Customers also used this RG400 Coax to make ham radio common mode chokes up to 5KW PEP

Physical Specifications:

• Inner conductor: Silver Plated Copper, Diameter: 19x0.203mm

• Dielectric/Insulation: PTFE, Diameter: 2.95mm

• Outer Conductor/Double-Shield: silver plated copper double braid , Diameter: 3.95mm

• Jacket: FEP, Diameter: 4.95mm

Electrical Specifications:

• Nom. Capacitance Conductor to Shield: 105 pF/m

• Nom. Characteristic Impedance: 50 Ω(ohm)

• Nom. Velocity of Propagation: 70%

• Min. Bend Radius(Install): 25mm

• Voltage Rating: 1900 VMS

• Max. Operating Frequency: 12400 MHz

• Operating Temperature Rating: -55℃ ~ +200℃

Attenuation:

• 100 MHz : 0.144 dB/m

• 400 MHz : 0.295 dB/m

• 1,000 MHz : 0.482 dB/m

• 5,000 MHz : 1.184 dB/m

• 11,000 MHz : 1.899 dB/m

The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below

20131210 114716 300x180 - Ferrite Ring Combo Pack

AC Cable on F-240 Toroid – 7 turns

20150125 103738 300x168 - Ferrite Ring Combo Pack

DC Cable on F240 – 4 turns

The ring toroids can also be used on coax or signal lines as shown below:

20131222 125533 300x180 - Ferrite Ring Combo Pack

RG58 12 turns on FT240

20131210 115137 300x180 - Ferrite Ring Combo Pack

Ethernet Cable on F-240 Toroid – 7 turns

For RFI/EMI wrap as many turns as possible for higher choking (under 30 mHz).