Ferrite Ring Combo Pack

The Ferrite Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple suppression mixes. Included in this combo pack are ten 2.4″ OD/1.4″ ID ring toroids as follows:

Mix 75 effective from .15-10 MHz including AM Broadcast band – quantity: 3

Mix 31 effective from 1-300 MHz for general purpose – quantity: 4

Mix 61 effective from 200-2000 MHz for cell phone, WIFI, HDTV, Cable TV interference – quantity: 3

442300405 - Ferrite Ring Combo Pack

+2

FSB61-1/2, ID=1/2", RFI Range 200-2000 MHz, Bulk Pack of 10

Store/Ferrite Core Products/Mix 61/Snap On - Mix 61 - RFI Range 200-2000 MHz

Product Details

Initial Permeability (@ 10KHz): 125

Material: NiZn

Max cable size - in/mm: .5/12.7

OD (A) - in/mm: 1.14/29

ID (B) - in/mm: .514/13.1

Length (C) - in/mm: 1.14/29

Z (ohms per bead - single turn 100 MHz): 205

Z ohms (per bead - single turn 250 MHz): 320

Z (ohms per bead - single turn 500 MHz): 435

Z (ohms per bead - single turn 1000 MHz): 457

Ferrite Snap On, ID = .514in/13.1 mm, Mix 61, Bulk pack of 10, RFI range: 200-2000 MHz

The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below

20131210 114716 300x180 - Ferrite Ring Combo Pack

AC Cable on F-240 Toroid – 7 turns

20150125 103738 300x168 - Ferrite Ring Combo Pack

DC Cable on F240 – 4 turns

The ring toroids can also be used on coax or signal lines as shown below:

20131222 125533 300x180 - Ferrite Ring Combo Pack

RG58 12 turns on FT240

20131210 115137 300x180 - Ferrite Ring Combo Pack

Ethernet Cable on F-240 Toroid – 7 turns

For RFI/EMI wrap as many turns as possible for higher choking (under 30 mHz).