Ferrite Ring Combo Pack

The Ferrite Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple  suppression mixes.  Included in this combo pack are ten 2.4″ OD/1.4″ ID ring toroids as follows:

Mix 75 effective from .15-10 MHz including AM Broadcast band – quantity: 3

Mix 31 effective from 1-300 MHz for general purpose – quantity: 4

Mix  61 effective from 200-2000 MHz for cell phone, WIFI, HDTV,  Cable TV interference – quantity: 3

CUBE 1:1 Feed Line Choke Balun, 1.5KW, 1.8-61 MHz Eyebolt Version - Dipoles

SKU CB-1-1500EB
$119.95
Bulk pricing available for quantities of 2 units or more
Output Connector Selection
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$109.958% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
CUBE 1:1 Feed Line Choke Balun, 1.5KW, 1.8-61 MHz Eyebolt Version - Dipoles
Product Details
Brand: Palomar Engineers
Effective Frequency Range (MHz): 1-61 MHz
PEP Power Rating (watts): 1500
Common Mode Attenuation (db): up to -38 dB
Estimated Insertion Loss (db): .10
Input Connector Type: SO-239 female
Output Connector Connector Type: side eyebolts and top halyard hoist
Enclosure Size (LxWxH inches): 4 x 4 x 2

1500 Watt PEP Rated 1:1 CUBE™ Balun for dipoles

* Help keep RF out of the shack.

* Provides maximum transfer of RF to the antenna.

* Suppress radiation from the feeder cable

* Makes the antenna radiation pattern predictable.

* Outperforms the competition by 24 dB common mode rejection! (see graphs)

* Reduces QRN and TVI to the neighbors.


The CB-1-1500 balun is useful as common mode feed line chokes or unbalanced coax to balanced antenna interface. SO-239 input to side terminal/eyebolt output. . Rated 1500 Watts PEP from 1-61 MHz. Common mode rejection up to -38dB over the frequency range. The CB-1-1500 is the balun version and the CU-1-1500 is the unun version (coax in and coax out).

Use as line isolator, antenna interface, or as a common mode choke to keep RF on the antenna and off the outside of the coax braid. Much more effective then our snap on ferrite beads as this balun which provides a higher choking impedance over a broad frequency range.

For most effective results, use another feed line choke (coax noise filter) at the radio. Helps reduce noise floor too by choking off common mode neighborhood noise picked up on outside of coax braid acting as secondary receive antenna


The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below

20131210 114716 300x180 - Ferrite Ring Combo Pack

AC Cable on F-240 Toroid – 7 turns

20150125 103738 300x168 - Ferrite Ring Combo Pack

DC Cable on F240 – 4 turns

The ring toroids can also be used on coax or signal lines as shown below:

20131222 125533 300x180 - Ferrite Ring Combo Pack

RG58 12 turns on FT240

20131210 115137 300x180 - Ferrite Ring Combo Pack

Ethernet Cable on F-240 Toroid – 7 turns

For RFI/EMI wrap as many turns as possible for higher choking (under 30 mHz).