Bullet Hybrid (4:1) HF Balun + 1:1 Choke, 1.8-61 MHz, 500 Watts, OCF, Loop, Folded Dipole Antennas

In stock
Product Details
UPC: Does not apply
Brand: Palomar Engineers
Model: Bullet-4-1-500EB
Frequency Band(s): 160-4 meters
Country/Region of Manufacture: USA
Type: NEW
Input ohms/Output ohms: 50 in, 200 out
Frequency Range < 2:1 SWR (MHz): 1.8-100
PEP Power Rating (watts): 500
Transformer Topology: Braodband Ferrite
Hardware Type: Stainless Steel
Weight (pounds): 2
Antenna Compatability: OCF, Folded Dipole, Loop

The Bullet-4-1-500EB is a multi-core, 4:1 (50 ohm to 200 ohm) balun plus a 1:1 feed line choke in a single compact (looks like a bullet) enclosure that is lightweight and easy to transport for your fixed/portable. Very useful for Off center fed, folded dipole and multi-band loop antenna systems. Halyard hoist at top of balun for convenient attachment point. Input is via SO-239 coax connector and output with side eye bolt output.Use a 500 ohm non-inductive termination resistor (Our part# TR-500-600) for the T2FD when using this balun.

Need higher power capability? See our 1500 watts 4:1 hybrid (part# CB-4-1-1500) or 5KW Hybrid (part# CB-4-1-5000)

Remember we over engineer our products, to out perform our competition - just compare the weight and frequency range of our baluns to theirs and you will know we put much more into our products so you don't have to worry about failure at a critical moment.

Save this product for later