Bullet(TM) Baluns/Ununs

Bullet™ and Super-Bullet™ Baluns and Ununs are 500/1500 watts PEP rated, purpose designed for portable and stealth installations for all antenna types.  Easy to deploy, heavy and sturdy enough to be thrown over a tree limb with ease and robust enough to run demanding digital modes like FT-8/FT-4, RTTY, and PSK31.  Buy the Bullet™ balun or unun of your choice and experience the fun of making your own custom antenna with our convenient wire add-on kits.  We are sure you will be pleased with the results.

CUBE™ Vertical Antenna Feed Line Choke, 1.8-61 MHz, 1.5KW

CUV-1-1500
$109.95
In stock
1
Product Details
UPC: Does not apply
Brand: Palomar Engineers
MPN: CV_1-1500
Type: New
Country/Region of Manufacture: United States
Effective Frequency Range (MHz): 1-61 MHz
PEP Power Rating (watts): 1500
Estimated Insertion Loss (db): .10
Input Connector Type: SO-239 female
Output Connector Connector Type: 1/4" stud/wing nut
Ground Connector (Y/N): 1/4 stud/wing nut
Enclosure Size (LxWxH inches): 4 x 4 x 2

Feed Line Chokes for Vertical Antenna with radials/counterpoise

Feed line chokes for verticals require a special arrangement to isolate the coax feed line from the radials and ground system. Schematically, a good feed line choke for verticals with radials should be built as follows:

Vertical Antenna Schematic 2 259x300 - Bullet(TM) Baluns/Ununs

Our CUV-1-1500 and CU-1-5000 feed line chokes are all internally connected to isolate the coax feed line as shown above.


1500 Watt Rated 1:1 Feed line Choke (Unun) for Verticals with radials

Th CUV-1-1500ST unun is a common mode feed line choke for vertical antennas with radials that need to be isolated from the coaxial feed line to keep common mode current from using the coaxial braid as another radial. Very effective with high choking of 1K-5K from 1.8-61 MHz and also incorporates two side studs/wingnut terminals for radial or ground connection at the antenna while isolating the coax feed line braid from the radials via the internal common mode feed line choke. Top terminal with stud/wingnut for vertical connection enclosed in a 4″ x 4″ x 2″ box..


To reduce receiver common mode noise for long runs of coax to your antenna, use a MC-1-3000 or CU-1-1500 feed line choke at the station end of the coax.

Save this product for later