Bullet™ and Super-Bullet™ Baluns and Ununs are 500/1500 watts PEP rated, purpose designed for portable and stealth installations for all antenna types. Easy to deploy, heavy and sturdy enough to be thrown over a tree limb with ease and robust enough to run demanding digital modes like FT-8/FT-4, RTTY, and PSK31. Buy the Bullet™ balun or unun of your choice and experience the fun of making your own custom antenna with our convenient wire add-on kits. We are sure you will be pleased with the results.

CABLE TV/Satellite RFI Coax Noise Filter, Suppresses 1-60 MHz common mode interference

Name: CABLE TV/Satellite RFI Coax Noise Filter, Suppresses 1-60 MHz common mode interference
SKU: CMNF-TV
Price: 69.95 USD
Availability: InStock

CMNF-TV

$69.95

In stock

Quantity:

Product Details

MPN: CMNF-TV

Country/Region of Manufacture: United States

Filter Power Rating (PEP watts): receiver only

Choking Impedance (ohms): 1000 - 7000

Common Mode Attenuation (db): 21 - 36 db

RFI Suppression Range (MHz): 200 KHz-30 MHz

Insertion Loss (db): .02

# Ferrite Filters: 3

Enclosure Size (inches): 4" x 2" x 1.5"

Typical Use:: Noise filter at radio end of coax next to receiver

CABLE TV/Satellite RFI Noise Filter for AM broadcast & shortwave from 1-60 MHz – Receive Only - F connector I/O - 75 ohm input/output, will pass DC straight thru

Purpose. The CMNF-TV is used to suppress RFI noise and common mode interference on the coaxial input line of satellite and cable TV receivers often caused by nearby transmitters

The filter is designed to have a high RF impedance to noise and interference from common mode currents on the outside of the coax braid while passing RF signal currents on the center conductor and inside of the coax braid to the antenna.

The effectiveness of the filter is dependent upon the amount of common mode noise encountered on the feed line. If your receive system has a large amount of common mode noise current then you should experience a reduction of common mode current which usually as heard as background noise level. Typical choking impedance is shown in the gallery picture.

Got Common Mode Noise? Not Sure - Find out now by clicking link below:

Palomar Engineers Common Mode Noise on Coax User Diagnosis Test

The filter was quite effective. Was surprised that it actually reduced the noise level
more than the signal so S+N/N improved by 1.9 S units.
Bill

Save this product for later