Balun Hybrids include an impedance balun (2:1, 4:1, 6:1, 9:1, 16:1, etc) and a 1:1 balun (choke) in a single enclosure. Use on OCF, loop, terminated dipoles and similar coax fed antennas requiring an impedance transformer Suppresses common mode current on the coax outer braid (prevents your dipole from acting as a tripole!).
This RFI kit is specifically designed to cure most sprinkler control systems triggered by Radio Frequency Interference problems. The kit contains a large (ID = 1") snap on filter for the AC power Line protection and snap on ferrite beads for 4 sprinkler control lines. (Multiple control lines can go through the same ferrite filter) The ferrites are selected to eliminate RFI from 1 to 300 MHz. The ferrites are easy to use, don’t require modification of the protected equipment and work in almost all cases.
If you need control line filters for more than 4 control line "bundles" order part # FSB31-1/2.