Balun Hybrids include an impedance balun (2:1, 4:1, 6:1, 9:1, 16:1, etc) and a 1:1 balun (choke) in a single enclosure. Use on OCF, loop, terminated dipoles and similar coax fed antennas requiring an impedance transformer Suppresses common mode current on the coax outer braid (prevents your dipole from acting as a tripole!).
1/2″/12.7mm max Cable Size Chokes
Model SLO-1/2 family of chokes are for use with ½” coax cable like RG-8, RG-213, 9913, LMR-400 and similar cables up to ½” diameter – works on all cable impedances (50, 62, 75, 90 ohms etc). 80-6 meters.Choose SLO-1/2 (5 beads) or for extended choking, choose SLO-1/2E (10 beads) or for super extended choking choose SLO-1/2SE (15 beads).
Select chokes with minimum of 500 ohms at your frequency of interest for best results or upgrade to our CUBE(TM), Super Choker(TM) or Maxi-Choker(TM) chokes up to 10,000 ohms choking.
Select 5 bead version for 80-2 meters use; 10 bead version for 160-6 meter use, 15 bead version for even higher choking power on 160-20 meter frequencies. Power rating is same as coax cable used power rating. Protective heat shrink included with beads and instruction manual.
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
The 5 bead, 1/2" model was previously part # BA-8
Testimonial:
KI7AY
Wanted to let you know that I was having a problem with RFI on 40m, but immediately after installing your Slip On Coax Feed Line Choke -1/2"/12.7mm cable, 1.8-300 MHz on a new RG-213 jumper between the IC-9100 and tuner, IT WENT COMPLETELY AWAY!
