Balun Hybrids include an impedance balun (2:1, 4:1, 6:1, 9:1, 16:1, etc) and a 1:1 balun (choke) in a single enclosure. Use on OCF, loop, terminated dipoles and similar coax fed antennas requiring an impedance transformer Suppresses common mode current on the coax outer braid (prevents your dipole from acting as a tripole!).
The Ferrite Snap On Sampler Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 1″ for use as either single turn or multiple turn ferrite choke filters.
The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
Mix 31 Ferrite Snap On Sampler (RFI Suppression range is 1-300 MHz)
FSB31-1/4 – 1/4″ ID – 3 pieces
FSB31-1/2 – 1/2″ ID – 3 pieces
FSB31-3/4 – 3/4″ ID – 3 pieces
FSB31-1 - 1" ID - 1 piece
