Balun Hybrids include an impedance balun (2:1, 4:1, 6:1, 9:1, 16:1, etc) and a 1:1 balun (choke) in a single enclosure. Use on OCF, loop, terminated dipoles and similar coax fed antennas requiring an impedance transformer Suppresses common mode current on the coax outer braid (prevents your dipole from acting as a tripole!).
This is a generic linear amplifier RFI kit for DC powered amplifiers. Works on many popular amplifiers including:
Specially designed for the Elecraft KPA500 linear amplifier used with the KX3 and similar transceivers.
Included are the following chokes and installation guidelines:
Included are the following chokes and installation guidelines:
RF Input:F240 ring – 5-9 turns of RG-58 size through center
RF Output:FSB-1 (Big Clamp on) – 3 turns of RG-8 size cable
PA KEY Cable:FSB-1/2 – multiple turns through choke – ½” diameter hole
AC Power Line:F240 ring – 5-6 turns through center
Computer/RS232/AUX Cable:FSB-1/2 – multiple turns through choke – ½” diameter hole
Also make sure you connect a good RF ground to the amplifier ground post.
