Balun Hybrids include an impedance balun (2:1, 4:1, 6:1, 9:1, 16:1, etc) and a 1:1 balun (choke) in a single enclosure. Use on OCF, loop, terminated dipoles and similar coax fed antennas requiring an impedance transformer Suppresses common mode current on the coax outer braid (prevents your dipole from acting as a tripole!).
Got an electronic interference problem on your boat or RV? Do you hear HUM-BUZZ-NOISE when you use the fish finder/radar/GPS/Generator or hear your voice on the stereo speakers when you transmit on the radio? Maybe you heard buzzing or humming when you turned on the battery charger/inverter/generator – any of these symptoms indicate you have RFI issues on your boat or RV and you need to stop it or the HUM-BUZZ-NOISE may drive you nuts!
But you don’t have to worry – We got the fix for you – lots of filters, all in a small box, that are easy to install on the wires of your electronic stuff that is bothered by the RFI.
If you have RFI, you need this kit:
|
Boat Owner’s Electronic Interference Suppression Kit Use this filter kit to suppress interference noise between electronic devices on your boat including: radar, fish finders, audio/video systems, inverter noise, solar controllers, vhf radio, marine/ham radio, auto pilots, electronic gauges, PA systems, and many other electronic devices. |
What is included:
A total of 17 Ferrite Ring/Snap-On Filters
Ring: 1.4” ID x 6, Snap on: 3/8” ID x 6, 1/2” ID x 5
Mix 31 Interference Range: 1-300 MHz
