Power Splitters & Combiners

Portable operation is fun but also brings challenges to the radio operator concerning receiver “noise” levels, RF interference from adjacent sources including close by transmitting stations, and RFI from portable generators. A typical scenario and some suggested Palomar product solutions are shown in the picture.

Portable Operation RFi Reduction Picture png - Power Splitters & Combiners

Portable operation is typical of ham radio operating events such as Field Day, Summits on the Air, Route 66 events, National Parks on the Air, California QSO party, DXpeditions, and emergency operation command posts, etc.

Suggestions

Each low power operating station with a generator should have:

  1. Generator RFI Kit (Part # RFI-GEN) with FSB31-1 ferrite filters at each end + Nylon ties for security
  2. Transceiver RFI Kit (Part # RFI-XCVR)
  3. Laptop RFI Kit (Part # RFI-1C)
  4. Coax Cable Noise Filter (Part # CMNF-1)
  5. Bullet-55 portable HF end fed antenna system


Refine by
 

Filters

Filters
Combiners and splitters (CS) are very useful devices in receive and transmit applications where signals need to be combined (from several antennas for example)or signals need to be split (into two amplifiers for example). They can provide equal voltages, equal current, or equal power to matched or unmatched loads. How it works depends on the product selected.