Antenna Products

50:600 ohm, (12:1) CUBE™ Balun/Unun, 1.8-31 MHz Balun/Unun, RX Only/1KW/2KW/3KW PEP, T2FD, Rhombic, End Fed, Flagpole

In stock
Product Details
Country/Region of Manufacture: United States
Type: New
Input ohms/Output ohms: 50 in/600 out balanced (balun) or unbalunced (unun)
Frequency Range < 2:1 SWR (MHz): 1.8-31
PEP Power Rating (watts): RX only/1000/2000/3000
Insertion Loss (dB): < .1 dB
Input Connector: SO-239
Hardware Type: Stainless Steel
Enclosure Size: 4 x 4 x 2, 3KW = 4 X 4 x 4
Weight (pounds): 2

HF 12:1 Impedance Transformers

12:1 Baluns are useful transformers for 600 ohm balanced loads the impedance at the end of the feed line is 600 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic, T2FD and traveling wave antennas.

12:1 Ununs are useful between coax and long wires with a load impedance near 600 ohms like a beverage antenna. Shortwave listener antennas also can benefit with the 12:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.

For end fed antennas, use a 9:1 unun or 12:1 unun - also available in the "Bullet" antenna end fed style (Bullet-12U-500)

Receive only baluns/ununs are rated for 100 watts PEP

All enclosure boxes have 2 side flanges with 1/4" holes.

All of these products are made to order and typical production time is 10 days depending on quantity.

Save this product for later
Palomar antenna products include feed line chokes, feed line to antenna matching transformers, static bleeders and other accessories. Click on the link to connect to the product you need.