HF Impedance Transformer Kits

775856125 - HF Impedance Transformer Kits
+3

Slip On Feed Line Common Mode Line Isolator - 1/2"/12.7mm coax cable, 1.8-300 MHz

BA-8-5
$19.95
In stock
1
Product Details
Brand: Palomar Engineers
MPN: SLO-1/2-NN, NN=5, 10, 15
Country/Region of Manufacture: USA
Effective Frequency Range (MHz): 3-300 (5 bead), 1.8-300 (10, 15 bead)
PEP Power Rating (watts): same as coax cable rating
Choking Impedance Range (ohms): 5 bead: 200-900, 10 bead: 400-1400, 15 bead: 600-1700
Common Mode Attenuation (db): 5 bead: 9-20 db, 10 bead: 16-24 db, 15 bead: 17-25 db
Estimated Insertion Loss (db): .025
Input Connector Type: none
Output Connector Connector Type: none
Ground Connector (Y/N): none
Enclosure Size (LxWxH inches): none

1/2″/12.7mm max Cable Size Chokes

Model SLO-1/2 family of chokes are for use with ½” coax cable like RG-8, RG-213, 9913, LMR-400 and similar cables up to ½” diameter – works on all cable impedances (50, 62, 75, 90 ohms etc). 80-6 meters.Choose SLO-1/2 (5 beads) or for extended choking, choose SLO-1/2E (10 beads) or for super extended choking choose SLO-1/2SE (15 beads).

Select chokes with minimum of 500 ohms at your frequency of interest for best results or upgrade to our CUBE(TM), Super Choker(TM) or Maxi-Choker(TM) chokes up to 10,000 ohms choking.

Select 5 bead version for 80-2 meters use; 10 bead version for 160-6 meter use, 15 bead version for even higher choking power on 160-20 meter frequencies. Power rating is same as coax cable used power rating. Protective heat shrink included with beads and instruction manual.

Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.

The 5 bead, 1/2" model was previously part # BA-8

Testimonial:

KI7AY
Wanted to let you know that I was having a problem with RFI on 40m, but immediately after installing your Slip On Coax Feed Line Choke -1/2"/12.7mm cable, 1.8-300 MHz on a new RG-213 jumper between the IC-9100 and tuner, IT WENT COMPLETELY AWAY!


Save this product for later
Display prices in: USD
These impedance transformer kits have been designed for the Do-It-Yourself (DIY) enthusiast and Instructor workshops on baluns and ununs for antenna matching and RFI use.

The impedance transformers are classified in ratios of 2:1 (100:50 ohm) to 16:1 (800:50 ohm).  The outputs can be configured as balanced (Balun) or as unbalanced (unun) with respect to the inputs which are considered all unbalanced coax at 50 ohms.  All impedance transformers are designed for 1.8-31 MHz unless otherwise specified.