HF Impedance Transformer Kits

2665304134 - HF Impedance Transformer Kits
+3

Coax Jumper Choke - RG-8X - RFI Range: 1.8-65 MHz, -30 dB Noise Reduction, 1.5KW PEP, 3 FT "Tail"

JC-1-1500-6
$34.95
In stock
1
Product Details
MPN: JC-1-1500
Country/Region of Manufacture: USA

Simple Jumper Feed Line Choke with 3 FT "tail" for other connections

The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point) to stop feed line radiation or at the radio end of the coax to suppress common mode coax noise current on the coax braid.

Improves antenna pattern by preventing your dipole from becoming a tripole

Suppresses pesky coax braid radiation and RFI

Reduces coax braid common mode current up to -30 dB ( 6 "S" units) on receive

Use one choke for each antenna feed line

Add a double female barrel connector to act as an "extension" of the existing coax.


Need the ring only and not the jumper, select F240-31-1 as the part #.


Save this product for later
Display prices in: USD
These impedance transformer kits have been designed for the Do-It-Yourself (DIY) enthusiast and Instructor workshops on baluns and ununs for antenna matching and RFI use.

The impedance transformers are classified in ratios of 2:1 (100:50 ohm) to 16:1 (800:50 ohm).  The outputs can be configured as balanced (Balun) or as unbalanced (unun) with respect to the inputs which are considered all unbalanced coax at 50 ohms.  All impedance transformers are designed for 1.8-31 MHz unless otherwise specified.