HF Impedance Transformer Kits

CUBE Feed Line Choke/Line Isolator Unun, 1.5KW, 1.8-65 MHz, -38dB Suppression

SKU CU-1-1500SO
$109.95
On Sale
List price $149.95 Save 27%
Bulk pricing available for quantities of 2 units or more
Single Side Input/Output
Input/Output Connectors
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$104.955% off
10 items$94.9514% off
50 items$89.9518% off
100 items$84.9523% off
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
CUBE Feed Line Choke/Line Isolator Unun, 1.5KW, 1.8-65 MHz, -38dB Suppression
Product Details
Brand: Palomar Engineers
Effective Frequency Range (MHz): 1.8-65 MHz
PEP Power Rating (watts): 1500
Estimated Insertion Loss (db): .10
Input Connector Type: SO-239 female
Output Connector Connector Type: SO-239 female
Ground Connector (Y/N): none
Enclosure Size (LxWxH inches): 4 x 4 x 2

1500 Watt Rated 1:1 CUBE™ Unun

Th CU-1-1500 unun is useful as common mode feed line chokes or coax to antenna interfaces. SO-239 output models can also be used with balanced antennas if a short coax cable “pigtail” is used on the output and connected to the antenna. Rated 1500 Watts PEP from 1.8-61 MHz.

Use as line isolator, antenna interface, or as a common mode choke to keep RF on the antenna and off the outside of the coax braid.

Much more effective then our sleeve feed line chokes due to our exclusive Multimix(TM) multi-core topology using high permeability ferrite cores which provides a high choking impedance over a broad frequency range.

Typical common mode suppression is 20-38 dB (up to 6 "S" units) from 1.8-61 MHz reduces common mode current! For most effective results, use 1 choke at the antenna and another at the radio. Helps reduce noise floor too by choking off common mode neighborhood noise picked up on outside of coax braid.

Optionally available with both input and output on same side for certain installations and wall mounts available on each side for both models.

Choose SO-239 UHF or N connector input/output connectors

These impedance transformer kits have been designed for the Do-It-Yourself (DIY) enthusiast and Instructor workshops on baluns and ununs for antenna matching and RFI use.

The impedance transformers are classified in ratios of 2:1 (100:50 ohm) to 16:1 (800:50 ohm).  The outputs can be configured as balanced (Balun) or as unbalanced (unun) with respect to the inputs which are considered all unbalanced coax at 50 ohms.  All impedance transformers are designed for 1.8-31 MHz unless otherwise specified.