HF Impedance Transformer Kits

2908446667 - HF Impedance Transformer Kits
+3

50:450 ohm (9:1) CUBE™ Unun, 1.8-31 MHz, 5 KW PEP, End Fed Antenna

CU-9-5000
$149.95
In stock
1
Product Details
Input ohms/Output ohms: 50 in / 450 out
Frequency Range < 2:1 SWR (MHz): 1-31 MHz
PEP Power Rating (watts): 7500

Model CU-9-5000 is a 9:1 multi-core unun housed in a NEMA enclosure box (4″ x 4″ x 2″) with top stud/eyebolt output used to translate a 50 ohm input up to 450 ohms at RF power levels up to 5000 watts PEP (SSB) when used with a matched load. Usable to 61 MHz under 2:1 SWR with matched load.

Great for end fed antennas - FT-8 and digital mode power ratings are approximately 30% of PEP ratings into a matched 450 ohm load. For non-resonant end fed antennas, you will need a feed line choke on the coax. See typical antenna configuration notes below for details.

Non-Resonant End Fed Antenna Configuration Notes
Save this product for later
Display prices in: USD
These impedance transformer kits have been designed for the Do-It-Yourself (DIY) enthusiast and Instructor workshops on baluns and ununs for antenna matching and RFI use.

The impedance transformers are classified in ratios of 2:1 (100:50 ohm) to 16:1 (800:50 ohm).  The outputs can be configured as balanced (Balun) or as unbalanced (unun) with respect to the inputs which are considered all unbalanced coax at 50 ohms.  All impedance transformers are designed for 1.8-31 MHz unless otherwise specified.