16:1 Baluns/Ununs

3540561917 - 16:1 Baluns/Ununs
+3

Termination Resistor, 500 Ohm Non-Inductive for T2FD, BBTD, Rhombic, 1-61 MHz, 600 Watts

TR-500-600
$99.95
In stock
1
Product Details

Broadband, Non-Inductive Termination Resistor load used on many terminated antenna types such as T2FD, Broadband Terminated Dipole (BBTD), Rhombics and others

Resistive Value: 500 ohms (+/- 10%)

SSB (25% duty cycle) rating in Watts: 600

CW/FT8 (50% duty cycle) in watts: 400

Length (tip to tip) Inches: 14"

Width inches: 3"

Inductance < 20 nH (1-61 MHz)


Internal Resistance Wattage: 200 watts

If you need more power rating, consider putting two TR-1000-600 resistors in parallel for a total of 1200 watts at 500 ohms.

Many designs for BBTD antennas using termination resistors at HFLINK.COM

Excellent BBTD Install info by K1FU

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.