16:1 Baluns/Ununs

443676452 - 16:1 Baluns/Ununs
+3

RFI Kit for Electric Fuel Pump Interference (4 filter set)

RFI-FP
$29.95
In stock
1
Product Details

Many older cars/trucks have a fuel pump in the gas/diesel tank that emits RFI through the external gauge connections. The simplest solution is multiple ferrite beads on the fuel pump connection wires outside of the fuel pump. You may need to lift the car/truck to gain access to these wires. Use two FSB31-1/2 snap on beads on each wire (usually 2 or 3 wires depending on make/model). Works on boat fuel pumps also.

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.