16:1 Baluns/Ununs

3096437560 - 16:1 Baluns/Ununs
+3

Palstar LA-1K Linear Amplifier Deluxe RFI Kit - 7 Filters for RF In/Out, AC power, Control Lines

RFI-PALSTAR-LA1K
$99.95
In stock
1
Product Details
MPN: RFI-PALSTAR-LA1K
Filter Power Rating (PEP watts): max coax cable rating
RFI Suppression Range (MHz): 1-600 MHz
# Ferrite Filters: 7
Typical Use:: AC/DC power, RF In/out (x3), Control Lines

All coax I/O and control lines and AC/DC power line for high end amplifiers with multiple RF inputs and outputs, control/keying/frequency I/O.

Includes typical amps such as Yaesu Quadra, Icom PW1, ACOM, ALPHA,Tokyo High Power, Palstar, ETC.

Included are the following chokes and installation guidelines to suppress RFI in and out:


Deluxe Kit:

RF Input (1x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center

RF Output (3x):Snap On Filter (1” ID) – 3 turns of coax cable through center

Relay/ALC Cables (1x):Snap On Filter (3/4” ID) – multiple turns through center, both cables in same ferrite

Band Control cable:Snap On Filter (3/4” ID)- multiple turns through filter

AC/DC Power:Snap On Filter (1” ID) – 3 turns of power cord through center

You get 1.4" ID Ring x 1, 1" ID snap on x 4, 3/4" ID snap on x 2 with each kit.

STOP THE RFI NOW WITH THIS SIMPLE TO INSTALL KIT

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.