16:1 Baluns/Ununs

637530531 - 16:1 Baluns/Ununs
+3

Household RFI Kit - Suppress Noise, Reduce RFI to Household Electronics - 10 Filters

RFI-HOUSEHOLD
$39.95
In stock
1
Product Details
MPN: RFI-Household
Country/Region of Manufacture: United States
Filter Power Rating (PEP watts): n/a
Choking Impedance (ohms): 300-5000 ohms with multi-turn
RFI Suppression Range (MHz): 1-300 MHz
# Ferrite Filters: 10
Typical Use:: household electronics
: 10

GENERIC HOUSEHOLD RADIO FREQUENCY INTERFERENCE (RFI) KIT

The RFI kit is designed to cure most household RFI problems. It contains ferrite toroids and beads selected to eliminate RFI from .1 to 300 MHz.The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.


What is in the kit? Three 1/2" ID snap on beads, three 1/4" snap on beads, 3 wall wart filter rings to suppress noise and interference and a large 1.4" ID ring for AC power cord installation on RFI prone equipment like computers, Home Theater Systems, telephones, etc.

Plus full instructions in the RFI Tip

Sheet. A $49.50 retail value if purchased separately.

Save this product for later
Display prices in: USD
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.